ETAP Power System Analysis for Electrical Engineer

In this course You will learn the ETAP Software, Load Flow Analysis, Short Circuit analysis, Arc Flash Analysis, Motor Acceleration Analysis, Protective Device Co ordination, Voltage Drop, Line Voltag...
created by Usman Saleem Mufti
3 Students
Last updated 2021-06-23
Enrollment: 23
Language: English
Share
$12
$32
Buy Now
30 days money back guarantee
This course has
Full Lifetime Access
Access on mobile
Certificate of Completion

Your Coverages

  • ETAP Software
  • Load Flow Analysis
  • Short Circuit Analysis
  • Arc Flash Analysis
  • Motor Acceleration Analysis
  • Protective Device Co ordination

    Course Requirements

  1. ETAP Software any Version

    Which Students must take this course

  1. Electrical Engineers, Power Engineers, Industrial Professionals

Course Content

Introduction to Course
00:03:30
Introduction to ETAP Software
00:05:06
How to Create Single Line Diagram on ETAP
00:20:06
How to Ad template on ETAP
00:08:58

Load Flow Analysis
00:12:45
Report Manager and Transformer Overloading
00:12:13
Composite Network in ETAP
00:06:53

Short Circuit Analysis
00:12:46
Arc Flash Analysis
00:16:31

Motor Acceleration Static Study
00:08:45
Motor Acceleration Dynamic Study
00:13:13
Motor Acceleration Study Dynamic with VFD
00:06:24

Cable Pulling System
00:04:32
Cable Ampacity Calculation
00:12:08

Description

In this course You will learn the ETAP Software, Load Flow Analysis, Short Circuit analysis, Arc Flash Analysis, Motor Acceleration Analysis, Protective Device Co ordination, Voltage Drop, Line Voltage Drop, Bus Voltage Drop, Load Terminal Voltage Drop, Full Load Ampere Calculation, Report Manager and How to Generate a Report on ETAP. Short Circuit Current Calculation, Arcing Current, Fault Clearing Time, Incident Energy, PPE Requirements as Per NFPA, Motor Acceleration Analysis Static and In Rush Current Calculation which is 5-7 Times than the Full Load Current. Motor Start Analysis Dynamic and Motor Start Analysis Dynamic with VFD (Variable Frequency Drive). Than We will also see the CT Para metering, Over Current Relay Setting, HV Breaker Setting and Selection, and than Perform the Sequence of Operation of Protective Devices. After that we will also see the Cable Pulling System and Cable ampacity Calculation with Under Ground Raceway System.

Instructor Profile

Usman Saleem Mufti
Usman Saleem Mufti
Automation Engineer
I am Automation Engineering Working in Burraq Engineering Solutions as an Design Engineer. I have 8 Years of Hands on Experience. I did lot of Project on Industrial Automation. I have 4 years Teaching Experience in Different sectors educational as well as Corporate sectors. I as a teacher available for the students for help. The primary and overall objective of this course is to give a novice an understanding of SCADA programming, and the inner workings of a standard HMI (Human-Machine Interface). Students will learn the difference between digital and analog signals and how to bring them into a PLC nd SCADA, process them, and send them back out. Students will be familiarized enough with a sufficient variety of SCADA designs to create a complete SCADA Project from scratch. Students will develop an understanding of alarm and notification programming, and the relevant considerations to safety and operator usability in SCADA. Students will be introduced to HMI development and given a general understanding of how an HMI program works.

Students Ratings

Rating Point 4
3 Students
$12
$32
Buy Now
30 days money back guarantee
This course has
Full Lifetime Access
Access on mobile
Certificate of Completion
total time 02:23:59
Message 1 sec ago
URL has been copied
whatsapp