ETAP Training Course

In this Course we will learn the ETAP and different analysis of Power System. In this Course we will learn the ETAP and different analysis of Power System. In this Course we will learn the ETAP an...
3 Students
Last updated 2022-11-27
Enrollment: 6
Language: Urdu
Share
$10
$30
Buy Now
30 days money back guarantee
This course has
Full Lifetime Access
Access on mobile
Certificate of Completion

Your Coverages

  • ETAP Load Flow Analysis
  • WAPDA Feeder Analysis with Multiple Transformer

    Course Requirements

  1. ETAP Software
  2. Electrical Basic Knowlege of Power System

    Which Students must take this course

  1. B-Tech, Engineers, Electrical and Electronics

Course Content

ETAP Overview and Load Flow Analysis
01:16:40
Lecture 2: Load Flow Analysis with multiple Transformer
01:04:37
Power Factor Improvement & Transformer Sizing
00:50:26
Power Factor Improvement (revision)
01:12:04
Cable Sizing
00:57:46
Short Circuit Analysis Arc Flash & Motor Acceleration Analysis
00:40:40
Protections
00:50:14
Solar System Design using ETAP
01:14:54
ETAP PROTECTOIN SCHEMES CABLE PULLING AND UNDEGROUND RACEWAY SYSTEM
01:17:58

Description

In this Course we will learn the ETAP and different analysis of Power System. In this Course we will learn the ETAP and different analysis of Power System. In this Course we will learn the ETAP and different analysis of Power System. In this Course we will learn the ETAP and different analysis of Power System. In this Course we will learn the ETAP and different analysis of Power System. In this Course we will learn the ETAP and different analysis of Power System. In this Course we will learn the ETAP and different analysis of Power System. In this Course we will learn the ETAP and different analysis of Power System. In this Course we will learn the ETAP and different analysis of Power System. In this Course we will learn the ETAP and different analysis of Power System. In this Course we will learn the ETAP and different analysis of Power System.

Instructor Profile

Usman Saleem Mufti
Usman Saleem Mufti
Automation Engineer
I am Automation Engineer Working in Burraq Engineering Solutions as a Design Engineer. I have 8 Years of Hands-on Experience. I did a lot of projects on Industrial Automation. I have 4 years of Teaching Experience in Different sectors educational as well as Corporate sectors. I as a teacher available for the students for help. The primary and overall objective of this course is to give a novice an understanding of SCADA programming, and the inner workings of a standard HMI (Human-Machine Interface). Students will learn the difference between digital and analog signals and how to bring them into a PLC nd SCADA, process them, and send them back out. Students will be familiarized enough with a sufficient variety of SCADA designs to create a complete SCADA Project from scratch. Students will develop an understanding of alarm and notification programming, and the relevant considerations to safety and operator usability in SCADA. Students will be introduced to HMI development and given a general understanding of how an HMI program works.

Students Ratings

Rating Point 4.67
3 Students
$10
$30
Buy Now
30 days money back guarantee
This course has
Full Lifetime Access
Access on mobile
Certificate of Completion
total time 09:25:23
Message 1 sec ago
URL has been copied
whatsapp